HOW IT WORKS
Each power injector receives power from a Ghozt MaxAmp connector, which plugs directly into our 5V step-down converters and is also compatible with our MaxAmp splitter cable and MaxAmp extender cables. This enables power to be delivered to the LEDs with minimal loss. The power injector then plugs in series with two pairs of strips, halos, or other neopixel sections via the industry standard JST 3-pin connector. This way, it efficiently distributes power to all connected devices while allowing data to pass seamlessly.
Example 1: A single neopixel power injector is connected at the output of the BlueGhozt module. This provides power to the BlueGhozt module, adds additional bulk capacitance to the setup.
Example 2: Neopixel Power Injectors are installed in each headlight close to the LEDs. This distributes power efficiently to the LEDs, provides power to the BlueGhozt module, and adds additional bulk capacitance to the setup.
Example 3: Neopixel Power Injectors are installed at the output of the BlueGhozt as well as in each headlight close to the LEDs. This distributes power efficiently to the LEDs, provides power to the BlueGhozt module, and adds additional bulk capacitance to the setup.