Each power injector receives power from a Ghozt MaxAmp connector, which plugs directly into our 5V step-down converters and is also compatible with our MaxAmp splitter cable and MaxAmp extender cables. This enables power to be delivered to the LEDs with minimal loss. The power injector then plugs in series with two pairs of strips, halos, or other neopixel sections via the industry standard JST 3-pin connector. This way, it efficiently distributes power to all connected devices while allowing data to pass seamlessly.
Finally, each power injector includes a bulk capacitor to help stabilize the voltage supply for improved reliability and reduced LED flicker.
Some examples of how the Neopixel Power Injector can be used in common setups, see the figures below. These are highly versatile components and can be used in many ways to provide the aforementioned benefits to your setup.
*** Note: This version currently available is NOT ASSEMBLED and requires assembly including soldering the capacitor on the board.
Example 1: A single neopixel power injector is connected at the output of the BlueGhozt module. This provides power to the BlueGhozt module, adds additional bulk capacitance to the setup.
Example 2: Neopixel Power Injectors are installed in each headlight close to the LEDs. This distributes power efficiently to the LEDs, provides power to the BlueGhozt module, and adds additional bulk capacitance to the setup.
Example 3: Neopixel Power Injectors are installed at the output of the BlueGhozt as well as in each headlight close to the LEDs. This distributes power efficiently to the LEDs, provides power to the BlueGhozt module, and adds additional bulk capacitance to the setup.
Still need 2 more but overall great product
I should come already assembled no soldering needed.
Brian, if you note – in the product description it says the item requires assembly. Thanks for your feedback.
looking forward to the potted version.
excellent product thank you